Product Code ::RXSOL-20-2044-210
Categories: Tank Cleaner-20
Product Short Description: Very effective complex blend of formulatory products, ideal for tank cleaning and pipeline solution
Product Description:

This very effective product and complex blend of terpenehydrocarbons which have very strong emulsification and cleaning action on wax.

Highly effective concentrated cleaner .

  • Versatile, can be used for a wide application range ( for TANK or general cleaning .)
  • Provides quick and thorough emulsifying action.
  • Can be used for cleaning of double bottom, pipeline deep and other fuel oil bunker tanks.
  • May also be used for cleaning  of crude and refined mineral oil cargo tanks.
  • It can be used as a general purpose cleaner to remove oil and grease deposits  and cleaning of bilge spaces and engine rooms from soiled surfaces.
  • Can be used for degreasing and cleaning engine cooling water systems



 

Product Application:

PIGGING Operation :::
WAXY Pipe walls can be clean by using RXSOL-20-2044-210 pigging method. And can be applied to a pipeline along with a series of co-solvent mixture..
RXSOL-20-2044-210 has also been successfully used to remove restrictive wax deposits in topside process equipment, topsides pipework, drains systems crude oil storage tank and crude oil flowline and risers.

Tank cleaning operation
Slack Wax (Cleaning procedure) 

(Paraffin with a high oil content and a high melting point)

  1. Steam the tank for approx. 1-1, 5 hour.The temperature should be at least 20°C above the melting point of the slack wax.
     
  2. Butterworth the tank 1-1, 5 hour directly after steaming with hot seawater or hot fresh water.Let the water flow on deck until the required temperature has been reached. The temperature during the cleaning should be 20°C. above the melting point of the wax. The cleaning time should be sufficiently long to reach the melting point of the wax.
     
  3. Due not interrupt the cleaning process and continue to Butterworth the tank with hotseawater or freshwater for another hour and inject the RXSOL-20-2044-210 (see method 3).Therefore mix the RXSOL-20-2044-210 into a drum with water (1 to 2 pails/100 litres water) and inject the mixture simultaneously into the Butterworth line during cleaning. The necessary amount to be injected depends on the consumption and number of Butterworth machines.Calculate for 10-15 m3 of wash water 1 pail  of RXSOL-20-2044-210
     
  4. Flush the tank with fresh water
     
  5. Ventilate, mop and dry the tank.

Note: during cleaning there should be no ballast water adjacent to the tank

Product Dose:

This product easily emulsify depoits at low temperatures (below 5 degree C) which makes it suitable for use in pipeline situations. Cost effective and best replacement of hazardous solvents of aromatic group such as Benzene,  xylene etc. It is safer to handle.

Product Note:

Deposition of WAX and nature of cleaning dirrectly affects application of  RXSOL-20-2044-210 within the pipeline / vessel.

Free Delivery / Supply Locations : 
Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Ras al Khaimah, Fujairah, Sharjah, Umm Al Quwain, Fujairah, Ruwais, Mina (Port) Zayed, Khalifa Port, Kizad, Port Rashid, Jebel Ali Port, DP WORLD, Jebel Ali Free Zone, Khor Fakkan Container Terminal, Port Rashid, Jebel Ali Port, Mina Kalid Port, Khor Fhakan Port ( Khawr Fakkan, Khawr al-Fakkan ), Sharjah Creek, Ajman, Port of Hamriyah, Mina Zayed Port, Mussafah port, Khalifa Port, Umm al-Nar Port, Um Al Quwain Port, Saqr Port, Port of Fujairah, Dibba Port, Jebel Dhanna, Mina Al Hamriya, Mina Rashid, All United Arab Emirates